LCD Display Three Phase Smart DIN Rail Meter
Basic Info
Model No.: RDK-GD1150
Product Description
Model NO.: RDK-GD1150
Installation: Direct Connected
Electric Equipment: Three-phase Four-wire
Power Meter Connection: Terminal
Type: Power Meter
Customized: Customized
Working Temperature Range: -25 to +55
Current Circuit Loss: Less Than 1va
Frequency: 50Hz/60Hz
Storage Temperature: -25c - +55c
Current: 1.5(6)a/5(20)a/10(40)a/5(40)a/10(60)a
Specification: CE, CCC, ISO9001, ISO14001
HS Code: 9028301400
Display: Digital
Usage: Multi-Functional Energy Meter, Watt-Hour Meter, Meter for Industry and Home Use, Standard Electric Energy Meter, Multi-rate Watt-hour Meters
Theory: Electronic Meter
Measured Signal: Pulse Peak
Certification: RoHS, ISO, CE
Accuracy Class: Active Class 1.0, Reactive Class 2.0
Working Voltage: 0.8un to 1.15un
Voltage: 3*220/380V, 3*100V/Customized Data
Operating Temperature: -5c - +45c
Insulating Class: IP51
Trademark: RADARKING
Origin: Wuhan, China
Three phase four wire electronic DIN rail active energy meter is a kind of new style three phase four wire active energy meter, it adopt micro-electronics technique, and imported large scale integrate circuit, use advanced technique of digital and SMT techniques, etc. The meter completely accord with relevant technical requirements of class 1 three phase active energy meter stipulated in international standard IEC 62053-21.
It can accurate and directly measure 50Hz or 60Hz active energy consumption from three phase four wire AC electricity net. It can display total energy consumption by step motor type impulse register. It has following features: Good reliability, small volume, light weight, specious nice appearance, convenient installation, etc.
Features
1. 35mm standard DIN rail installation, complying with standard DIN EN50022. Or front board installed (mounting holes center distance 63 mm), users can choose any one by themselves.
2.Ten pole width (Modulus 12.5mm), complying with standard JB/T7121-1993.
3. Standard configuration 6 digits display (999999kWh) by step motor type impulse register. May select 7 digits display by impulse register.
4. There are a polarity port of pulse output passive closed and a nonpolarity port of pulse output passive distant, the output rate is 10 or 100 imp/kWh (can select). And contact with all kind of AMR system conveniently, Complying with standard IEC 62053-31.
5. Five LED instructions respectively every power supply state and signal of closed energy impulse and distant energy impulse.
6.Automatic detection the direction of the flow of load current. And instructions (signal of closed energy impulse is green when working, that is meaning the direction of the flow of load current reverse).
7. Standard configuration type S wiring (Inlet from bottom, outlet from top) for direct connect operation, we can also choose another type of wiring, and use 5+1 digits display by impulse register, CT (Product Configuration code is CF) and PT & CT for operation.
8. Standard configuration short terminals cover, may select extension terminals cover, in order to protect to use safety.
Rated Current(A) | 3/1.5(6),3/5(20),3/10(40),3/15(60),3/20(80),3/30(100) |
Rated Voltage(V) | Three-phase three-wire 3x100V or 3x380V Three-phase four-wire 3x200/380V or 3x57.7/ 100V |
Rated Frequency(Hz) | 50 or 60 |
Accuracy class | Class 1.0 or Class 2 |
Performance criteria | |
Operating humidity | ≤ 75% |
Storage humidity | ≤ 95% |
Operating temperature | -5°C - +45°C |
Storage temperature | -25°C - +55°C |
Humanity | 75% yearly average,95% on 30 days/year |
International standard | IEC62053-21 |
Protection against penetration of dust and water | IP51 |
Insulating encased meter protective class | IP51 |
*Please advise us if you need any different specifications,we can make according to your special requirement
Transportaion & Storage Condition
The meters should be free from violent collision when being delivered or sealed off, and the buyer should in accord with the rules of ZBW003-82/84 for General Technical Conditions Of Instrument And Apparatus Packaging to transport and store them.
The meter should be stored in its original pack and the ambient temperature to keep them should be within -25ºC and 70ºC, there are no corrosive gas in the air.
The meter should be placed on the shelves in the warehouse and the stack height should be less than 5 cartons.
There shall be no harmful substance causing the corrosion in the air.
Contact us if you need more details on DIN-Rail Energy Meter. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Energy Meter、Electric Meter. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Energy Meter > DIN-Rail Energy Mete
Other Products
Hot Products
Ultrasonic Residential Heat Meter Dn15-Dn300Single DIN-Rail Electronic Energy Meter for International MarketRemote Control Smart Current Meter with Demand Metering (DDZY150/C-Z)Single Phase Power-Billing Electric Meter +RS485 CommunicationIC Card Prepaid Electric Meter Measuring Instrument Kwh Meter Prepayment MeterAnti-Theft Double Circuit Intelligent Electric/Kwh/Energy MeterNon-Return Valve, Plastic Material (Dn15-25mm)Pulse Water Meter Multi Jet Dry DialMeter for Cold /Hot Water with Remote Reading FunctionWater Meter Box, Plastic Material (Dn15-20mm)Basic Meter for Smart Water MeterWater Meter of Multi-Jet Dry Dial Type (LXSG-15E-40E)Brass Body, Dry Dial Type, Single Jet Water MeterBrass Volumetric Kent Type Water Meter (LXD-15E-40E)Removeable Dry Type Woltmann Water Meter (LXL-50E-500E)Water Meter, IC/RF Card Prepaid Smart Type (Dn15-25mm)