Single Phase Multi-Tariff Electronic Kwh Meter

Model NO.: DDSF155 Installation: Direct Connected Electric Equipment: Single-phase Power Meter Connection: Terminal Type: Power Meter Customized: Customized Current: 1.5(6)a/5(40)a/5(60)a/10(60)a Operating Temperature: -25c-- +55c Clock Error: 0.5s/D (23c) Dimension: 112mm X 160mm X 58mm Pulse Constant(Imp/Kwh): 6400, 3200, 2400, 1600, 1200, 800, 400, 200 Specification: CE, CCC, ISO 9001/2008, ISO14001 HS Code: 9028301900 Display: Digital Usage: Multi-Functional Energy Meter, Watt-Hour Meter, Meter for Industry and Home Use, Standard Electric Energy Meter, Prepayment Meter, Reactive Energy Meter, Multi-rate Watt-hour Meters, Maximum Demand Meter Theory: Electronic Meter Measured Signal: Pulse Peak Certification: RoHS, ISO, CE Voltage: 110V/220V/230/240V Accuracy Class: 0.2s, 0.5s, 1.0(Active Power); 2.0(Reactive Power) Overall Power Consumption: 1.5W,6A Output Pulse Width: (80plus20) Ms (DC) Weight: About 0.8kg Trademark: RADARKING Origin: Wuhan, China Single Phase Fee Control Smart Electric Meter is a smart metering device with special design for nation smart grid. With independent infrared, RS485, carrier communication and IC card interface, it can support for remote or local fee control function. The meter has advantages of high accuracy, good linearity, wide range and long life, which can widely used in city, country or school and any enterprise.



Features

1. Energy Measurement:
Forward, Reversed and the sharp, peak, shoulder and off-peak combination active and reactive energy, Four-quadrant.

2. Frozen Function:
Timing frozen, Instantaneous frozen, Appointed frozen, Daily frozen, Measurement, Period frozen Energy.
3. Demand Record:

MD and time of the total, Sharp, Peak, shoulder, and off-peak of forward and reversed active.
MD and time of the total, Sharp, Peak, shoulder, and off-peak of combination reactive.
MD and time of the total, Sharp, Peak, shoulder, and off-peak of four-quadrant reactive.
Forward and reversed MD and time of the total Phase A, B, C.
Real-time Measurement: Measurement of Voltage, Current, Power, PF and Phase-angle.
Time Interval and Tariff: Four-kind of Tariff supported and two-set period.

4. Event Record:
missing voltage, under-voltage, over-voltage, missing phase, completely missing voltage, current/voltage phase sequence reversed, current/voltage imbalance, missing current, over-current, cover opened, terminal opened, programming, MD cleared, energy cleared, clock calibration, etc.

5. Reading:
Manually reading: reading the data when press the up-button and down-button.
Reading by HHU(Hand Held Unit): reading the data through Infrared by HHU.
PC reading: reading the data by PC with RS485 communication port.
Reading when power off: when the power off, the meter can be woke up by the button, and then the data can be read from LCD display or by HHU automatically.

6. Display:
LCD display with backlight. The data can be display by pressing button or recycle display automatically.

 

Name	Parameter
Standards	IEC62053-21:   2003,   DL/T645-2007, GB/T17215.321,   State  Grid  and  China  Southern  Grid  Smart  Meter  Standard
Voltage	220V  (Single  Phase)
Current	1.5(6)A,   5(20)A,   5(30A),   5(40)A,   5(60)A,   10(40)A,   10(60)A,   15(60)A,   20(80)A,   30(100)A
Frequency	50Hz
Accuracy	Class  2.0
Impulse  Constant (imp/kWh)	6400,   3200,   2400,   1600,   1200,   800,   400,   200
Clock  Accuracy	≤   0.5s/Day  (Refer  to  temperature  of  23  centigrade); ≤   ±   1.0s/Day  at  -25  to  +60centigrade)
Capacity  of  Lithium  Battery	≥   1.2Ah,   the  working  time  lasts  more  than  5  years    even  if  power  off  .
Data  Storage  Period	≥   10  years

Transportation & Storage

The goods should be free from violent collision when delivery and being sealed off, and as per the rules of GB/T13384-2008 General Technical Conditions Of Mechanical and Electronic Products Packaging  to transport and store them.

Stack the inventory and storage on the shelves under the condition of original package and its height should be no more than 8 levels.

The place to store the goods should be clean and the temperature should be in the range of 0 and 40ºC as well as less than 85% of relative humidity; And the hazardous substance that would lead to the corrosion is not allowed to exist in the air .

After-sale Service

Except for the conditions of properly operating the instruction by the users and still complete seals from manufacturer within 18 months from the date of delivering goods , our company will be responsible for free repair or replace if any quality problem happens;

Additionally, we will stick to provide excellent after-sale service even the guarantee period is over.

Contact us if you need more details on Electric Meter. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Smart Meter、Digital Meter. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Energy Meter > Smart Multi-Tarrf Energy Meter