Three Phase Fee Charged Smart Energy Meter with Carrier Communication
Basic Info
Model No.: DTZY150C
Product Description
Model NO.: DTZY150C Installation: Direct Connected Electric Equipment: Three-phase Four-wire Power Meter Connection: Terminal Type: Energy Meter Current: 5(40)a, 5(60)a, 10(60)a Accuracy Class: 1.0, 2.0 Relative Humidity: Less Than 75% Output Pulse Width: (80±20) Ms (DC) Pulse Constant(Imp/Kwh): 6400, 3200, 2400, 1600, 1200, 800, 400, 200 Specification: CE, CCC, ISO9001/2008, ISO14001 HS Code: 9028301900 Display: Digital Usage: Multi-Functional Energy Meter, Watt-Hour Meter, Meter for Industry and Home Use, Standard Electric Energy Meter, Prepayment Meter, Reactive Energy Meter, Multi-rate Watt-hour Meters, Maximum Demand Meter Theory: Electronic Meter Measured Signal: Continuous Wave Voltage: 3*220/380V, 3*100V/Customized Data Frequency: 50Hz/60Hz Clock Accuracy: 0.5s/Day Clock Error: 0.5s/D Communication Code: Local RS485, Infrared Trademark: RADARKING Origin: Wuhan, China This Fee Control Smart Electric Meter is a smart metering device with special design for nation smart grid. With independent infrared, RS485, carrier communication and IC card interface, it can support for remote or local fee control function. The meter has advantages of high accuracy, good linearity, wide range and long life, which can widely used in city, country or school and any enterprise.
Functions:
Energy Measurement:
Forward, Reversed and the sharp, peak, shoulder and off-peak combination active and reactive energy, Four-quadrant.
Frozen Function: Timing frozen, Instantaneous frozen, Appointed frozen, Daily frozen, Measurement, Period frozen Energy.
Demand Record:
MD and time of the total, Sharp, Peak, shoulder, and off-peak of forward and reversed active.
MD and time of the total, Sharp, Peak, shoulder, and off-peak of combination reactive.
MD and time of the total, Sharp, Peak, shoulder, and off-peak of four-quadrant reactive.
Forward and reversed MD and time of the total Phase A, B, C.
Real-time Measurement: Measurement of Voltage, Current, Power, PF and Phase-angle.
Time Interval and Tariff: Four-kind of Tariff supported and two-set period.
Event Record:
Missing voltage, under-voltage, over-voltage, missing phase, completely missing voltage, current/voltage phase sequence reversed, current/voltage imbalance, missing current, over-current, cover opened, terminal opened, programming, MD cleared, energy cleared, clock calibration, etc.
Reading:
Manually reading: Reading the data when press the up-button and down-button.
Reading by HHU(Hand Held Unit): Reading the data through Infrared by HHU.
PC reading: Reading the data by PC with RS485 communication port.
Reading when power off: When the power off, the meter can be woke up by the button, and then the data can be read from LCD display or by HHU automatically.
Display:
LCD display with backlight. The data can be display by pressing button or recycle display automatically.
Remote communication:
Data reading
Data saving
Clock calibration
Data accounting
Events record and reporting
Abnormal Alarm
Software update by remote or local communication
On-line supported
Routine data reported automatically can be set.
Important events reported automatically
Data flow can be accounted and limited
Communication: RS485, Infrared, PLC, optional...Prepayment with CPU Card, as well as remote prepayment with PLC, GPRS and others.
Contact us if you need more details on Energy Meter. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Kwh Meter、Power Meter. If these products fail to match your need, please contact us and we would like to provide relevant information.
Functions:
Energy Measurement:
Forward, Reversed and the sharp, peak, shoulder and off-peak combination active and reactive energy, Four-quadrant.
Frozen Function: Timing frozen, Instantaneous frozen, Appointed frozen, Daily frozen, Measurement, Period frozen Energy.
Demand Record:
MD and time of the total, Sharp, Peak, shoulder, and off-peak of forward and reversed active.
MD and time of the total, Sharp, Peak, shoulder, and off-peak of combination reactive.
MD and time of the total, Sharp, Peak, shoulder, and off-peak of four-quadrant reactive.
Forward and reversed MD and time of the total Phase A, B, C.
Real-time Measurement: Measurement of Voltage, Current, Power, PF and Phase-angle.
Time Interval and Tariff: Four-kind of Tariff supported and two-set period.
Event Record:
Missing voltage, under-voltage, over-voltage, missing phase, completely missing voltage, current/voltage phase sequence reversed, current/voltage imbalance, missing current, over-current, cover opened, terminal opened, programming, MD cleared, energy cleared, clock calibration, etc.
Reading:
Manually reading: Reading the data when press the up-button and down-button.
Reading by HHU(Hand Held Unit): Reading the data through Infrared by HHU.
PC reading: Reading the data by PC with RS485 communication port.
Reading when power off: When the power off, the meter can be woke up by the button, and then the data can be read from LCD display or by HHU automatically.
Display:
LCD display with backlight. The data can be display by pressing button or recycle display automatically.
Remote communication:
Data reading
Data saving
Clock calibration
Data accounting
Events record and reporting
Abnormal Alarm
Software update by remote or local communication
On-line supported
Routine data reported automatically can be set.
Important events reported automatically
Data flow can be accounted and limited
Communication: RS485, Infrared, PLC, optional...Prepayment with CPU Card, as well as remote prepayment with PLC, GPRS and others.
| Technical standards: | IEC 62052-11:2003 IEC62053-21:2003 GB/T 17215.211-2006,GB/T 17215.321-2008, GB/T 17215.323-2008,GB/T 17215.301-2007, DL/T 614-2007,DL/T645-2007,Q/GDW376.1-2009 | ||||
| Communication code | Wireless GPRS, Local RS485, Infrared | ||||
| Specification | Voltage | 3x220/380V | |||
| Current | 1.5(6)A | ||||
| Voltage measurement range | 0.7Un---1.2Un | ||||
| Accuracy class | Active | 1 class | Reactive | 2 class | |
| Operating temperature | -25°C-- +55°C |
| Relative humidity | ≤75% |
| Starting current | Transformer connection type: 0.002ln {1class} |
| Overall power consumption | 1.5W,6A |
| Clock error | ≤0.5s/d (23°C) |
| Battery life | 10 years |
| The output pulse width | (80±20) ms (DC) |
| Dimension | 290mm X 170mm X 85mm (L x W x H) |
| Weight | About 2.3Kg |
Contact us if you need more details on Energy Meter. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Kwh Meter、Power Meter. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Energy Meter > Smart Multi-Tarrf Energy Meter
Other Products
Hot Products
Ultrasonic Residential Heat Meter Dn15-Dn300Single DIN-Rail Electronic Energy Meter for International MarketRemote Control Smart Current Meter with Demand Metering (DDZY150/C-Z)Single Phase Power-Billing Electric Meter +RS485 CommunicationIC Card Prepaid Electric Meter Measuring Instrument Kwh Meter Prepayment MeterAnti-Theft Double Circuit Intelligent Electric/Kwh/Energy MeterNon-Return Valve, Plastic Material (Dn15-25mm)Pulse Water Meter Multi Jet Dry DialMeter for Cold /Hot Water with Remote Reading FunctionWater Meter Box, Plastic Material (Dn15-20mm)Basic Meter for Smart Water MeterWater Meter of Multi-Jet Dry Dial Type (LXSG-15E-40E)Brass Body, Dry Dial Type, Single Jet Water MeterBrass Volumetric Kent Type Water Meter (LXD-15E-40E)Removeable Dry Type Woltmann Water Meter (LXL-50E-500E)Water Meter, IC/RF Card Prepaid Smart Type (Dn15-25mm)