High Quality Electric Meter, Electronic Meter, Electricity Energy Meter Suppliers in China

Home > Products > Energy Meter > Smart Multi-Tarrf Energy Meter > Single Phase Electric Power Smart Electric Meter (DDZY150-Z)

Single Phase Electric Power Smart Electric Meter (DDZY150-Z)

Basic Info

Model No.:  DDZY150-Z

Product Description

Model NO.: DDZY150-Z Installation: Direct Connected Electric Equipment: Single-phase Power Meter Connection: Terminal Type: Energy Meter Customized: Customized Current: 5(40)a, 5(60)a, 10(60)a Accuracy Class: 2.0 Trademark: RADARKING Origin: China Display: Digital Usage: Multi-Functional Energy Meter, Watt-Hour Meter, Meter for Industry and Home Use, Standard Electric Energy Meter, Prepayment Meter, Reactive Energy Meter, Multi-rate Watt-hour Meters, Maximum Demand Meter Theory: Electronic Meter Measured Signal: Continuous Wave Certification: RoHS, ISO, CE Voltage: 220V Frequency: 50Hz Clock Accuracy: 0.5s/Day Specification: CE, CCC, ISO9001/2008 HS Code: 9028301900 This Fee Control Smart Electric Meter is a smart metering device with special design for nation smart grid. With independent infrared, RS485, carrier communication and IC card interface, it can support for remote or local fee control function. The meter has advantages of high accuracy, good linearity, wide range and long life, which can widely used in city, country or school and any enterprise.

Functions:

1. Energy Measurement:

Forward, Reversed and the sharp, peak, shoulder and off-peak combination active and reactive energy, Four-quadrant.

Frozen Function: Timing frozen, Instantaneous frozen, Appointed frozen, Daily frozen, Measurement, Period frozen Energy.

Demand Record:

MD and time of the total, Sharp, Peak, shoulder, and off-peak of forward and reversed active.

MD and time of the total, Sharp, Peak, shoulder, and off-peak of combination reactive.

MD and time of the total, Sharp, Peak, shoulder, and off-peak of four-quadrant reactive.

Forward and reversed MD and time of the total Phase A, B, C.

Real-time Measurement: Measurement of Voltage, Current, Power, PF and Phase-angle.

Time Interval and Tariff: Four-kind of Tariff supported and two-set period.

 2. Event Record: 

missing voltage, under-voltage, over-voltage, missing phase, completely missing voltage, current/voltage phase sequence reversed, current/voltage imbalance, missing current, over-current, cover opened, terminal opened, programming, MD cleared, energy cleared, clock calibration, etc.

Reading:

Manually reading: reading the data when press the up-button and down-button.

Reading by HHU(Hand Held Unit): reading the data through Infrared by HHU.

PC reading: reading the data by PC with RS485 communication port.

Reading when power off: when the power off, the meter can be woke up by the button, and then the data can be read from LCD display or by HHU automatically.

3.  Display: 

LCD display with backlight. The data can be display by pressing button or recycle display automatically.

 4. Remote communication:

Data reading
Data saving
Clock calibration
Data accounting
Events record and reporting
Abnormal Alarm
Software update by remote or local communication
On-line supported
Routine data reported automatically can be set.
Important events reported automatically
Data flow can be accounted and limited
 
5. Communication:

RS485, Infrared, PLC, optional.. Prepayment with CPU Card, as well as remote prepayment with PLC, GPRS and others.

Single Phase Electric Power Smart Electric Meter (DDZY150-Z)
Technical standards: IEC 62052-11:2003   IEC62053-21:2003
GB/T 17215.211-2006,GB/T 17215.321-2008,
GB/T 17215.323-2008,GB/T 17215.301-2007,
DL/T 614-2007,DL/T645-2007,Q/GDW376.1-2009
Communication code Local RS485, Infrared, PLC
 
Specification
Voltage 230V
Current 1.5(6)A
Voltage measurement range 0.7Un---1.2Un
Accuracy class Active 1 class Reactive 2 class
 
Operating temperature -25°C-- +55°C
Relative humidity ≤75%
Starting current Transformer connection type: 0.002ln {1class}
Overall power consumption 1.5W,6A
Clock error ≤0.5s/d (23°C)
Battery life  10 years
The output pulse width (80±20) ms (DC)
Dimension 175mm X 150mm X 85mm (L x W x H)
Weight About 2.3Kg

Contact us if you need more details on Energy Meter. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Kwh Meter、Power Meter. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Energy Meter > Smart Multi-Tarrf Energy Meter