Pulse Output Water Meter for Multi Jet Water Meter

Model NO.: LXSG-15E-50E Medium Temperature: Cold and Hot Water Meter Counter Instructions: Digital Application: Civil Medium Pressure: Pn16 Stucture: Wireless Communicating Diameter: 15-25mm MOQ: 100piece Specification: ISO9001, CQM, HS Code: 90282010 Install: Horizontal Level Measurement: B Nominal Diameter: 15-25mm Principle: Speed of Water Meter Work Environment: Dry Water Meter Materail: Brass or Iron Cert: ISO9001 Trademark: gaoxiang Origin: Shangdong, Chian
Product Description
What is the details for Pulse Output Water Meter?

Product Description--Pulse Output Water Meter

It is equipped with a reed switch assembly which can be connected to remote reading system.The Reed Switch Pulse sends out electric signals per a preset water quantity

Reed Switch Assembly
* The reed switch pulser  consists of a plastic housing with a reed switch to read the total consumption  of water.
*Pulser wiring : cable
*2 core, 1.5M long ,3.5mm  diameter
*Red---black : pulse team
*Reed switch :single
*Electric Data :   Vmax :24 AV/DC , Imax : 0.01A

1. Features:
 
--Magnetic drive, protected against external magnetic tampering;

--Vacuum sealed register, frost resistant, keeps clear reading for long time;

-Brass body;

--Brass body  can be painted

--External adjusting device,;

--For  cold water;

--Remote transmission device can be added upon request

--Many kinds of sensors, such as Reed Switch, Hall and Weagand can be supplied upon request Pulse output may be 1l/pulse ,10l/pulse ;

--The meters conform to ISO4064 Standard Class B


2. Working condition:

--Water temperature≤50°c

--Water pressure≤1MPa  (PN: 1.6MPa/16bar)
 
--ΔP≤0.1MPa(Class B)
 
--ΔP≤0.063MPa(R80/R100)


3. Accuracy:

From minimum flow-rate (qmin) inclusive, to transitional flow-rate (qt), exclusive:±5%

From transitional flow-rate (qt) inclusive, to overload flow-rate (qs), exclusive:±2%

Diameter (DN)	mm	15	20	25
flow ratio	Q3/Q1	80 ~ 100
overload flow Q 4	M3/h	3.125	5	7.875
permanent flow Q 3	M3/h	2.5	4	6.3
transitional flow Q 2	M3/h	0.04	0.064	0.126
Min flowQ 1	M3/h	0.025	0.05	0.063
Pressure loss	MPa	≤0.063
Max.pressure	MPa	≤1
Water temperature	°C	0.1--30
readings	M3	0.0001 -- 9999
Communication interface	M-Bus

4. Installation And Usage for the Pulse Output Water Meter

Select the right water meter according to nominal flow rate which is less than or next to the rate through the pipe. It is not a good way for the user to buy the water meter based on the pipe size.

The place to be installed should be free from sunshine, frost,  pollutant and water. During the period of frost, the inlet valve in the meter should be closed and the outlet valve and water tap should be open except for being packed for thermal insulation, thus to prevent the damage from being frozen.

Meter should be installed horizontally, and the digits on the dial is up to the face and arrow direction in the meter should be same with the flow.

The stone, sand and slight impurities in the new installed pipe should be cleared off for the sake of the meter fault.

For the purpose of metering accurately, the water tap should be higher than the meter.

Water meter should be not connected with pipe and there are live interface (e.g. pipe interface, connection screw, sealing washer etc.) between the meter and pipe. The meter should not be damaged due to the over-stress caused by pipe and its elements during installation.
 
 
1. Materials: brass body, ABS inner core, brass sealing ring, pulse output wire
2. Working Condition: Temperature ≤50°C
3. Measured by Cubic Meter
4. Quantity of Flow:
 
Main Technical Data For Pulse Output Water Meter
 

DN mm	Accuracy Grade	Qmax 1/h	Qn 1/h	Qt 1/h	Qmin 1/h
15	2	3125	2500	40	25
20	2	5000	4000	64	40
25	2	7875	6300	100	63
32	2	12500	10000	160	100
40	2	20000	16000	256	160
50	2	31250	25000	400	250

 
Q3/Q1=100 Q2/Q1=1.6 Q4/Q3=1.25
 
5. Working pressure: 1.0 Mpa
6. Loss of pressure: ≤0.1 Mpa
7. Indicating error:
at low zone of Qmin to Qt (not including) is ±5%
at high zone of Qt to Qmax is ±2%
 
8. Dimension and Weight for Remote Reading Water Meter 

Item No.	Unit	LXSY-15	LXSY-20	LXSY-25	LXSY-32	LXSY-40
DN	mm	15	20	25	32	40
Total Length	mm	260	300	345	365	373
Length	mm	165	195	225	230	245
Width	mm	95.5	95.5	100	104	120
Heigth	mm	105.5	107.5	116.5	117	151
connecting screw	inch	G3/4″	G1′	G1′1/4	G1′1/2	G2′
Weight	kg	1.46	1.75	2.51	3.6	4.61

Contact us if you need more details on Pulse Output Water. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Multi Jet Water Meter、Dry Dial Water Meter. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Pulse Output Water Meter