High Quality Transformer Metal Box, Transformer Metal Box Factory, Transformer Metal Case Suppliers in China

Home > Products > Smart Metering System > Power Transformer Metal Box

Power Transformer Metal Box

  • Power Transformer Metal Box
  • Power Transformer Metal Box
  • Power Transformer Metal Box

Power Transformer Metal Box

Product Description


1.Power Transformer Metal Box products description:


PC metal box with a new type of environmental protection engineering polycarbonate (PC) manufacturing, with high insulation performance, good transparency, UV resistance, aging resistance, acid rain, salt spray resistance, low temperature resistance, impact resistance and other properties. With good ventilation, rain, heat and other functions. Normal service life of more than 20 years.
The meter box adopts the integrated design idea, a table to sixteen all kinds of Electric Energy Meter and the measuring circuit is assembled in a closed box integration, not only has small occupied space, easy installation and management, but also can stop stealing hit metering device, preventing electricity stealing.
The PC meter box is beautiful in appearance, and the proportion is even, the line is smooth, and it can be conveniently and firmly installed on the concrete wall. Box components compact structure, reasonable layout, clear and smooth lines. The box cover hook, screw and padlock box and interlock. Only the reading function, people do not need to open the tube can directly see the abnormal phenomenon inside, so as to improve the safety of electric exclusion, so as to realize the safe use of electricity, the preventive management objectives.
2. Product Specification
Type Pre-paid Single Phase Two Meter Box (card)
Material PC
AC Frequency 50HZ or 60HZ
Nominal Voltage 220V, 380V, 690V
Electric Current 10A-225A
Ambient Temperature -25 -+80ºC, and the average temperature difference is not more than +35ºC;
Clean Air Relative humidity at 40 ºC not exceeding 80%. A higher relative humidity is allowed when the temperature is low;
Less Than 10000 Meters Above Sea Level;
Altitude ≤10000m
Ability to Withstand Earthquakes Intensity 8 degrees
Note The product is our standardized product.We would provide it with you as the parameter if you have other parameter.
3.Characteristic
3.1. Box Cover's Material: Polycarbonate (PC) by the engineering plastics, flame retardant PC/ABS engineering plastic.
3.2. Box's structure: The box consists of a box cover and a box bottom, a box cover and a box bottom with multi-point concealed hook fixed structure can be matched with various accessories, lock, box thickness is 3mm (12.16 bit metering box thickness 3.5mm;
3.3. Fully Transparent Upper Cover design: the table case is transparent, the window door is integrated with the box cover, which is convenient for the management, supervision, inspection and maintenance of the electric power management department;
3.4. Large capacity: single body box can meet the requirements of the 16 table installation, can be expanded to 20 meters, to meet the requirements of 10mm2 copper core power line;
3.5.The upper cover and the base are provided with hinges, which can be opened at 1800, and the upper cover is not needed to be taken out of the box;
3.6. In and out of the hole: watch box into and out of the hole with waterproof connector;
Shutter design: taking into account the need for heat dissipation, both sides of the metering box with shutter.
3.7. Design: built-in to prevent small animals into the protective net. The top of the table box is sealed to prevent the rainwater from entering.
Shandong Province Yangxin Genshen Electric Co., Ltd was founded in 2012 and her subsidiary,Qingdao Yaoutongxing International Trading Co.Ltd, is founded in Qingdao.We are specialized in JP Cabinet, Power Distribution, Electric Energy Metering box, High Voltage Switch Cabinet, Box Type Substation, Transformer, Protection Devices, Low voltage switchgear and other electrical equipment and accessories with ISO9001, TUV, and CE standard in China, which is the partner of State Grid Corporation and National Railway Administration of China.We have always cooperated with China's government.We guarantee the highest quality of our products and services with every order.Taking exceptional care with every request is not only our policy, it's our promise.We will at all times be known as professional and honorable operators who are as good as our word.


More services we offer:

Besides of Metal Stamping components,Transformer Metal Case, we also complete solution for OEM/ODM products & components, offer services of deep drawing services, EMI metal shielding parts, heat sink ,plastic molding products for custom, plastic injection components, Metal Stamping Parts, home appliances accessories ,R/C drone and smart electronic toys etc.

Our advanced equipments, professional engineers ,high quality system, enable us to provide high quality with low production cost Based on our strength, passion and capacity, we devote to supply one-stop service to customers.



Timeplex Industrial Limited

 

Timeplex group is a Hong Kong based organization with integrated manufacturing facilities in China. Established in 1989, Timeplex brought the Hong Kong management system to meet international standard, along side with years of proven technique and experience.

Timeplex provides customer with complete development capabilities starting from product concept, prototypes to feasibility samples and volume manufacture. Product range including metallic, plastic, electrical and electronics. Our engineering team help clients to develop the product to meet stringent specifications and to compile with the necessary mandatory standards.

Through the effort in the past two decades, Timeplex has become one of the operations who can continuously stand behind its high quality, innovation, affordable pricing and flexible lead time that clients need to remain competitive in the market.

MAIN PRODUCT LINE :

Metallic components may be designed from various materials, steel, copper, brass, aluminium, tin and lead alloys in sheets,heatsink,EMI/RFI shielding metal case, rolls, rods or ingots
Components in different sizes and configurations may be produced by stamping, forming. extrusion, forging, die-casting and secondary operation such as punching, deep drawing, drilling, threading, and riveting.


For outside appearance and environmental protection, components usually require surface finishing in electro-plating (chrome, nickel, copper, silver or gold), anodizing or powder coating.


In some cases when it is difficult to use metal stamping components to achieve the required configuration, such as piping, curvature or threading, plastic injection parts is a better option. Development of plastic products or part starts from an injection mold. Choice of plastic resins will be the first consideration our engineers will suggest to the client. From the most suitable material such as ABS, PS, PE, PP, PVC, PC etc, and based on customer target production rate and the investment budget, the mold design will be determined and fabrication will start.


Components and parts coming out of the injection molding machine will be relatively uniform. Many of them could replace more than one metallic part or even become a finished product by itself.


Major customers Include : Sky TV. Walmart, Osram, Hasbro, Intermec, PPG, Fender, Q.A. Smith, Delta, Vtouch, East West, B.A.G., Electrolux


Production Equipments :

Power Press (16 ton to 200 ton) 50

Injection Molding Machines 22
Auto Grooving Machines 5
Silk-screening & Pad Printing Line 1
Assembly Line 3



Company Info

  • Company Name: Timeplex Industrial Limited
  • Representative: AnZhi Sun
  • Product/Service: Metal stamping , Metal stamping components , Metal stamping parts , Plastic injection components , Heatsink , plastic parts
  • Capital (Million US $): 5,000,000
  • Year Established: 1989
  • Total Annual Sales Volume (Million US $): US$10 Million - US$50 Million
  • Export Percentage: 91% - 100%
  • Total Annual Purchase Volume (Million US $): US$5 Million - US$10 Million
  • No. of Production Lines: above 10
  • No. of R&D Staff: 5 -10 People
  • No. of QC Staff: 21 -30 People
  • OEM Services Provided: yes
  • Factory Size (Sq.meters): 10,000-30,000 square meters
  • Factory Location: No.4 Fukang Road,Shang Sha Community,Chang An Town,Dongguan City,Guangdong Province ,China
  • Contact Person: Mr. Alan Nong
  • Tel: 86-769-38809668
Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters