Single-Phase Electronic Terminal Block Electric Current Meter

Model NO.: DDS155


Installation: Direct Connected


Electric Equipment: Single-phase


Power Meter Connection: Terminal


Type: Energy Meter


Customized: Customized


Product′s Type: Register/LCD/LED


Power Consumption: 0.8 W/Phase


Communication Interface: Infrared, RS485/ LV Power Line Carrier


Storage and Operating Humidity: Less Than 95%


Delivery Detail: Subject to Technical Requirements and Amount of or


Specification: CE, CCC, ISO9001/2008, ISO14001


HS Code: 9028301900




Display: Digital


Usage: Multi-Functional Energy Meter, Watt-Hour Meter, Meter for Industry and Home Use, Standard Electric Energy Meter, Prepayment Meter, Reactive Energy Meter, Multi-rate Watt-hour Meters, Maximum Demand Meter


Theory: Electronic Meter


Measured Signal: Continuous Wave


Certification: RoHS, ISO, CE


Brand: OEM/Radarking


Current: 1.5(6)a, 5(20)a,5(40)a, 15(60)a


Starting Current: 0.002ib


Operating Temperature: -25~+55 Centigrades


Pulse Constant(Imp/Kwh): 6400, 3200, 2400, 1600, 1200, 800, 400, 200


Trademark: Radarking


Origin: Wuhan, China


Features

1. A smart metering device with special design for nation smart grid.;

2. Full digitalized anti-theft energy meter(combing with ADE7755, ADE7751, CS5460A measuring chip)

3. Has advantages of high accuracy, good linearity, wide range and long life, and can widely used in city, country or school and any enterprise.



Functions

1. Front board three fixed installation, the cover is made of PC material which is transparent and anti-UV molded overall, the bottom and the terminal of the meter are made of black glass fiber which can fire-retardant and enhanced PC material, and the IP rating up to IP56. It has following features: Good weather ability, anti-impact, good insulation performance, specious appearance, etc.



2. Standard configuration the bottom and the terminal of the meter are closed by the screw of the meter, may select the bottom and the terminal of the meter are closed by ultrasonic. (Please specified when ordering).



3. Standard configuration 5+1 digits display (99999.1kWh) by step motor type impulse register. May select 6+1 digits display (Product Configuration code is AK).



4. Standard configuration one port of pulse output passive (polarity), May select increase a distant port of pulse output passive (nonpolarity). And contact with all kind of AMR system conveniently.



5. Standard configuration only one LED instructions signal of energy impulse (red), may select add instructions power supply state (green) and automatic detection the direction of the flow of load current and instructions by LED (when display yellow, that is meaning the direction of the flow of load current reverse). Please specified when ordering.



6. Single direction single component measure single phase two wire active energy consumption. It is nothing with direction of the flow of load current. Complying with standard IEC 62053-21.



7. Standard configuration short terminals cover, may select extension terminals cover, in order to protect to use safety.

Accuracy Class	1 or 2
Reference Voltage Un(V)	220
Operating Voltage	0.7 U n ~ 1.2 U n
Rated Current Ib(A)	5(30),10(40),10(60),20(80)
Starting Current	0.002Ib
Rated Frequency	50Hz
Power Consumption	<2W ,6VA
Display Mode	LCD
Communication Interface	Infrared, RS485/ LV power line carrier
Overall Dimensions	160mm´122mm´70mm
Work Environment	Normal operating temperature: -30°C~+55°C Limit of operating temperature: -45°C~+70°C Storage and transport temperature: -45°C~+70°C Storage and Operating humidity: ≤95%

Contact us if you need more details on Electronic Meter. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Kwh Meter、Prepayment Meter. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Energy Meter > Electronic Energy Mete