Single Phase DIN Rail Meter with RS485

Model NO.: DDS155


Installation: Direct Connected


Electric Equipment: Single-phase


Power Meter Connection: Terminal


Type: Power Meter


Customized: Customized


Working Temperature Range: -25 to +55


Current Circuit Loss: Less Than 1va


Rated Current: 5(20)a ,5(25)a ,5(30)a,5(32)a,,etc.


Operation Current Range: 0.05ib~ Imax


Pulse Output(Imp/Kwh): 6400, 3200, 1600, 1200, 800, 400, 200


Specification: CE, CCC, ISO9001, ISO14001


HS Code: 9028301400




Display: Digital


Usage: Watt-Hour Meter, Meter for Industry and Home Use, Standard Electric Energy Meter, Reactive Energy Meter


Theory: Electronic Meter


Measured Signal: Continuous Wave


Certification: RoHS, ISO, CE


Accuracy Class: Active Class 1.0


Working Voltage: 0.8un to 1.15un


Voltage: 110V/220V/230V/240V


Starting Current: 0.004ib


Max.Storage Temperature: -30 ~ +75 Centigrade


Trademark: RADARKING


Origin: Wuhan, China




This meter is designed to measure single phase two wire AC active energy and variable parameter. All of its functions comply with the relative technical requirement for class 1 single phase watt hour meter in IEC61036 and its data communication rules obey the requirement of DL/T645 or MODBUS-RTU. It is a long life meter with the advantage of high stability , high over load capability , low power loss and small volume .





Basic Function



1. LCD display



2. Bi-directional total active energy measurement ,reverse active energy measure in the total active energy



3. The meter also display real voltage , real current , real power , real power factor



4. Pulse LED indicates working of meter,Pulse output with optical coupling isolation



5. RS485 communication port



6. 35mm din rail installation



Features:



1.35mm standard DIN rail installation, complying with standard DIN EN50022. Or front board setting

(mounting holes center distance 63 mm), users can choose any one by themselves.



2. Six pole width (Modulus 12.5mm), complying with standard JB/T7121-1993.



3. Standard configuration 6+1 digits display (999999.1kWh). May select 5+2 digits display (Please specified when ordering).



4. Two LED instructions respectively power supply state (green) and signal of energy impulse (red).



5. Standard configuration don't detection direction of the flow of load current. May select automatic detection the

Direction of the flow of load current. And instructions by an individual LED.



6. Single direction measure single phase two wire active energy consumption. It is nothing with direction of the

Flow of load current. Complying with standard IEC 62053-21.



7. Standard configuration type S wiring (Inlet from bottom, outlet from top) for direct connect operation, we can also choose another type of connection, and use CT (Product Configuration code is IC) and PT & CT

Accuracy	Class 1.0
Rated voltage	220VAC,230VAC,240VAC,etc.
Operation voltage range	Un± 20%
Insulation capabilities	AC voltage withstand 2kV for 1 minute ; Impulse voltage withstand 6kV - 1 . 2/50μs waveform
Rated current	5(20)A ,5(25)A ,5(30)A, 5(32)A ,,etc.
Operation current range	0.05Ib~ Imax
Starting current	0.004Ib
Rated frequency	50Hz or 60 Hz
Internal power consumption	Voltage Circuit ≤1.0W 5VA ; Current Circuit ≤1VA(Ib)
Interface	Optical coupler (So corresponding to DIN 43864)
Impulse valence Ra	0,5 or 1.0 Wh/imp
Max.operation temperature	-25 ° C ~ +70 ° C
Max.storage temperature	-30 ° C ~ +75 ° C
Relative humidity	≤ 85%
*Please advise us if you have any different specifications,we can make according to your spcal requirements.

Working Conditions:



The installation altitude less than 2000m;



The surrounding temperature range: From -25~40 degree;



In the non-explosive condition. Or without adequate erosion and destruction of gas and dust conductive area;



Without rain and snow invade;



Pollution level 2;

Contact us if you need more details on Energy Meter. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Digital Meter、Electric Energy Meter. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Energy Meter > DIN-Rail Energy Mete