High Quality Energy Meter, Digital Meter, Electric Energy Meter Suppliers in China

Home > Products > Energy Meter > DIN-Rail Energy Mete > Three Phase DIN Rail Digital Display Electronic Energy Meter

Three Phase DIN Rail Digital Display Electronic Energy Meter

Basic Info

Model No.:  DTS150

Product Description

Model NO.: DTS150 Installation: Direct Connected Electric Equipment: Three-phase Four-wire Power Meter Connection: Terminal Type: Power Meter Customized: Customized Working Temperature Range: -25 to +65 Current Circuit Loss: Less Than 1va Voltage: 3X100V or 3X380V Connection: Direct Connected Pulse Constant(Imp/Kwh): 6400, 3200, 2400, 1600, 1200, 800, 400, 200 Specification: CE, CCC, ISO9001, ISO14001 HS Code: 9028301400 Display: Digital Usage: Multi-Functional Energy Meter, Watt-Hour Meter, Meter for Industry and Home Use, Standard Electric Energy Meter, Reactive Energy Meter, Multi-rate Watt-hour Meters Theory: Electronic Meter Measured Signal: Continuous Wave Certification: RoHS, ISO, CE Accuracy Class: Active Class 1.0, Reactive Class 2.0 Working Voltage: 0.8un to 1.15un Display Method: LCD 6+1 Current: 3/1.5(6),3/5(20),3/10(40) Frequency: 50Hz/60Hz Trademark: RADARKING Origin: Wuhan, China
The meter completely accord with relevant technical requirements of class 1 single phase active energy meter stipulated in international standard IEC 62053-21. It can accurate and directly measure 50Hz or 60Hz active energy consumption from single phase AC electricity net

Functions:
1. 35mm standard DIN rail installation, complying with standard DIN EN50022.  Or front board setting (mounting holes center distance 63 mm), users can choose any one by themselves.
2.  Six pole width (Modulus 12.5mm), complying with standard JB/T7121-1993.
3.Standard configuration 5+1 digits display (99999.1kWh) by step motor type  impulse register. May select 6+1 digits display (Product Configuration code is AK).
4.Standard configuration one port of pulse output passive (polarity),May select increase a distant port of pulse output passive (nonpolarity), (Product Configuration code is AI).
5.And contact with all kind of AMR system conveniently,complying with standard IEC 62053- 31 and DIN 43864.
6.Two LED instructions power supply state (green) and signal of energy impulse (red).
7.Standard configuration dont detection direction of the flow of load current. May select automatic detection the direction of the flow of load current. And instructions (Only red  energy impulse signal when working, that is meaning the direction of the flow of load current reverse).
8.Single direction measure single phase two wire active energy consumption. It is nothing with direction of the flow of load current. Complying with standard IEC 62053-21.
 
Technical Specification
Rated Current(A) 3/1.5(6),3/5(20),3/10(40),3/15(60),3/20(80),3/30(100)
Rated Voltage(V) Three-phase three-wire 3x100V or 3x380V
Three-phase four-wire 3x200/380V or 3x57.7/ 100V
Rated Frequency(Hz) 50 or 60
(Accuracy class)  Class 1.0 or Class 2
 

Working condition
1. The installation altitude less than 2000m
 2. The surrounding temperature range: from -5~40 degree
3. In the non-explosive condition. or without adequate erosion and destruction of gas and dust conductive area 
4. Without rain and snow invade
5. Pollution level 2.

Contact us if you need more details on DIN-Rail Energy Meter. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Energy Meter、Electric Meter. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Energy Meter > DIN-Rail Energy Mete